Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
56
Replication CLI Commands
•
--target
: Target host name or IP of the replication report. If the system or
the share/partition has two targets configured, you must use the
--target
option and you must specify a target IP or hostname. If the system or the
share/partition has no target configured, invoking the commands will result
in error.
•
--start
: Start time in UTC count for the replication report.
•
--end
: End time in UTC count for the replication report.
Downloading a
Replication Report
syscli --downloadrpt replication
This CLI command allows the admin user to download or copy the generated
replication report to the home directory. The admin user can then copy the file
to another host if desired.
Getting the Status of
Active Cartridge Base or
File/Directory Request
syscli --getstatus trigger --source | --target
This CLI command allows the user to get the status of active cartridge or file/
directory replication on the specified source or target.
Listing Unpack Queue
Items
syscli --list unpackqueueitems
This CLI command allows the CLI user to list unpack queue items which are
Directory/File based replications for data received from the source system.
The
--list
option lists all unpack queue items.
Getting the Status of
the Active
Synchronization
Requests
syscli --getstatus sync --source | target
This CLI command allows the CLI user to get the status of active synchronization
requests on the specified source or target.
Listing the File/
Directory-Based
Replication Status and
Statistics
syscli --list filedirrepstats --name <share name>
This CLI command returns the list of file/directory-based replication status and
statistics of the data sent to the target for the specified share on the source
system.
Listing Shares Eligible
to Receive Directory/File
Based Data
syscli --list filedirtarget [--name <share name>]
This CLI command returns the list of shares that have deduplication enabled and
are eligible to receive directory/file based data.
When the share name is specified, the status of any directory/file based
replication displays.
