Chapter 4 Using Your Tape Drive
Front Panel Controls and LEDs
SDLT 600 Product Manual
2
When the cleaning cycle completes, the cleaning tape automatically
ejects from the tape drive and the yellow alert LED turns off.
3
Remove the cleaning tape, place it back into its plastic case, and mark
the label after each cleaning.
Front Panel Controls and LEDs
4
All controls and LEDs are on the tape drive’s front panel. See
figure 20
for
details. Use these controls and LEDs to operate the tape drive and
monitor the SDLT 600 tape drive system’s activities.
Table 32
and
table 33
on page 79 describe Control and LED functionality.
Figure 20 SDLT 600 Tape
Drive Front Panel
Note:
On the last cleaning, the cleaning tape will not eject.
Use the Eject button on the front of the tape drive to
eject the expired cleaning tape and dispose of the
cleaning tape.
Green/Orange LED
Green LED
Yellow LED
Eject Button
iTalk Port
(Cleaning Required)
(Drive Density)
(Drive Status)