Chapter 3 Installing Your Tape Drive
Warranty Note
SDLT 600 Product Manual
38
•
Configuring and Installing a Tabletop Tape Drive with SCSI Interface
describes how to configure and install the tabletop version of the tape
drive.
•
Confirming the Installation
describes how to confirm that the tape
drive has been installed correctly.
Warranty Note
3
Please refer to the warranty before installing your tape drive. Certain
actions taken during installation could void the warranty if not properly
conducted.
Generally, the Limited Product and Limited Repair Warranties are
contingent upon proper use in the application for which the product is
intended; and do not cover the product if you perform any of the
following actions:
• Modify the product without the manufacturer’s written approval.
• Subject the product to unusual physical, environmental, or electrical
stress, including damage caused by handling or shipping in
unapproved containers or packaging.
• Disturb any warranty labels, or the integrity of the product in any
other way.
• Remove or damage the serial number label to the extent that
warranty status of the product cannot be determined.
Safety, Handling, and ESD Protection
3
Inappropriate or careless handling of SDLT 600 tape drive systems may
result in damage to the product. Follow the precautions and directions to
prevent damaging the SDLT 600 tape drive system. In addition, follow
the steps in
Pre-Installation Guidelines
on page 41 to ensure that you
have the correct hardware for your system configuration.