Chapter 3 Installing Your Tape Drive
Configuring and Installing a Tabletop Tape Drive with SCSI Interface
SDLT 600 Product Manual
67
• You must terminate the AC plug in a grounding-type male plug
designed for use in your country or region. It must also have marks
showing certification by an agency acceptable in your country or
region.
• The tabletop unit cord connector must be an IEC type CEE-22 female
connector.
• The cord must be no longer than 4.5 meters (14.5 feet).
• The cord must be FCC compliant with emissions specifications.
Figure 18
shows the AC power cord plug-end types for 115 V AC and
220/240 V AC usage.
Figure 18 AC Power Cord
Connector Types
The tabletop unit power supply has an auto-sensing feature; it requires
no adjustment or switch setting changes for different AC sources.
See
figure 17
and
figure 18
for more details for the AC cord and AC cord
connector. Connect one end of the AC cord into the power connector on
the back of the tabletop tape drive; connect the other end of the cord to
the AC outlet. Upon completion, proceed to the next section to confirm
the installation.
