![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-7000/dlttape-dlt-7000_product-manual_3550827261.webp)
SCSI Commands
Quantum DLT 7000 Tape System
5-157
5.20
REWIND COMMAND (01h)
The REWIND command directs the tape drive to position the tape at the beginning of
the currently active partition (for DLT drives, this is BOM). Before rewinding, the tape
drive writes any write data that is in the buffer to the tape medium and appends an
End of Data marker.
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (01h)
1
Logical Unit Number
Reserved
Immed
2 - 4
Reserved
5
Unused
Reserved
Flag
Link
Figure 5–75 REWIND Command Descriptor Block - Data Format
Table 5–74 REWIND Command Data - Field Descriptions
Field Name
Description
Immed
Immediate. If this bit is set to 1, the tape drive first writes any remaining
buffered data to tape medium and adds an EOD marker. It then returns status
to the host
before
beginning the actual rewind operation. If this bit is 0,
status will be sent
after
the rewind has completed.
Summary of Contents for DLTtape DLT 7000
