![background image](http://html2.mh-extra.com/html/quantum/dlttape-dlt-7000/dlttape-dlt-7000_product-manual_3550827181.webp)
SCSI Commands
Quantum DLT 7000 Tape System
5-77
MODE SELECT (6) / (10) Command (15h) / (55h) (continued)
Table 5–41 Disconnect / Reconnect Page - Field Descriptions (continued)
Field Name
Description
DTDC
Data Transfer Disconnect Control. This field defines further restrictions
for when disconnect is permitted.
DTDC
Description
00b
Data transfer disconnect control is not used. Disconnect is
controlled by the other fields in this page.
01b
Once the data transfer of a command has been started, a target
does not attempt to disconnect until all the data to be
transferred has been transferred.
10b
Reserved.
11b
Once the data transfer of a command has started, a target does
not attempt to disconnect until the command is complete.
If DTDC is a non-zero value and the maximum burst size is non-zero, the
tape drive returns CHECK CONDITION status, sense key set to ILLEGAL
REQUEST and additional sense code set to ILLEGAL FIELD IN PARAMETER
LIST.
Summary of Contents for DLTtape DLT 7000
