Quantum DLTtape DLT 7000, Product Manual

Page: 186 / 312

SCSI Commands
5-82 Quantum DLT 7000 Tape System
MODE SELECT (6) / (10) Command (15h) / (55h) (continued)
5.9.6 Device Configuration Page (10h)
The Device Configuration Page controls the drive’s behavior on the SCSI bus
and allows an initiator to tune bus performance.
Bit
Byte
7 6 5 4 3 2 1 0
0 PS (0) 0 Page Code (10h)
1 Additional Page Length (0Eh)
2 Res’d CAP (0) CAF (0) Active Format (0)
3 Active Partition (0)
4 Write Buffer Full Ratio
5 Read Buffer Empty Ratio
6 - 7
(MSB)
Write Delay Time
(LSB)
8 DBR (0) BIS RSmk (0) AVC (0) SOCF (0) RBO (0) REW (0)
9 Gap Size (0)
10 EOD Defined (0) EEG SEW (1) Reserved
11 - 13
(MSB)
Buffer Size at Early Warning (0)
(LSB)
14 Select Data Compression Algorithm
15 Reserved
Figure 5–41 Device Configuration Page - Data Format