Quantum DLTtape DLT 7000, Product Manual

Page: 155 / 312

SCSI Commands
Quantum DLT 7000 Tape System 5-51
LOG SENSE Command (4Dh) (continued)
Bit
Byte
7 6 5 4 3 2 1 0
5n –1
to
5n
(MSB)
Parameter Code (n)
(LSB)
5n + 1 DU DS TSD ETC TMC Rsv’d LP
5n + 2 Parameter Length (1)
5n + 3 Value of TapeAlert Flag (Flag is set when Bit 0 = 1; Bits 1 – 7 are Reserved)
Figure 5–23 TapeAlert Page Log Parameters Format
Table 5–25 TapeAlert Page Log Parameter Field Descriptions
Field Name Description
Parameter Code This field contains the Flag code. See Table 5-26 for the supported
Flags, level of severity, and the Flags’ definitions.
Parameter Length This field is set to 1.
Value of Tape Alert Flag If Bit 0 is set to 1, this indicates that TapeAlert has sensed a problem.
See Table 5-26 for the supported Flags and their definitions. If Bit 0 is 0,
the Flag is not set and no problem has been sensed.
For definitions of bits that make up the Control Byte (the byte “5n + 1” above),
refer to Section 5.8.3, Table 5-21.