Release Notes
Document 6-01378-10 Rev A
October 2008
Firmware Notes
3
•
SAS Host Bus Adapter and Host Bus Adapter Drivers
—SAS host bus adapter
and drivers (combined) must support SAS standard 1.1 or higher.
•
Library Service Utility
—You must run the Library Service Utility prior to
upgrading firmware if you are currently running firmware version
320G.GS004 or 400G.GS006.
•
Firmware Update Tape Functionality
—This feature was removed in version SP4
in order to simplify the firmware update process and prevent errors. This
includes creating and erasing firmware update tapes, and updating drive
firmware via a firmware update tape.
•
Inventory Operations
—Do not perform user interface operations (for
example, working with RAS tickets, creating/modifying/deleting partitions)
while the library is performing an inventory.
•
Closing the Internet Browser
— Log out of the library before closing the
Internet browser window when you are using the web client. If you do not
log out, the session will remain open.
•
Internet Explorer 7 Security Message
—Internet Explorer version 7 displays an
informational message stating that the certificate issued by the library is not
from a trusted source. This is normal behavior and does not affect library
function. The library issues certificates based on local network data and is not
a typical Web site that would be issued a certificate by a trusted source for
public access via SSL. Accept the warning and continue.
•
Library SNMP Support
— The library supports SNMP v1, v2c, and v3. SNMP
traps are only reported in v1 as defined by RFC 1157. The timeout for all
SNMP requests to the library must be at 10 seconds or greater (command line
parameter
-t
).
•
Kerberos Limitation Issue
— When setting up the library to use Kerberos
remote authentication, an error is generated if you try to use the IPv6 address
for the
KDC (AD Server)
field. Instead of using the IPv6 address, use the fully
qualified domain name (FQDN).
