background image

Release Notes

Document 6-01378-10 Rev A

October 2008

Known Issues

7

20555 and

 

20963 

Unreadable cartridge barcode labels 

can restart the library during a move. 

This problem occurs when a tape 

cartridge in the library has a barcode 

label that is unreadable (smudged, 

scraped, upside-down in top slot of 

library, etc.) but the library  previously 

recognized the cartridge, either 

through a successful scan, a touch 

teach, or the drive reported the 

cartridge. The library restarts after 

completing the move but before 

notification that the move complete is 

returned to the host application. This 

may occur in the following 

circumstances:

• The tape cartridge is moved into a 

tape drive;

• The tape cartridge is moved to a 

storage cell of a partition where 

there are less than two empty slots in 

the storage area; or

• The cartridge is moved to the I/E 

station(s) where there are less than 

two empty slots.

Make sure your cartridge barcode labels 

are readable. Make sure barcode labels 

are right-side up in the top slots of the 

library. Make sure your scratch cartridge 

barcode label is readable when running 

demo or diagnostics tests.
If the problem occurs, perform a “move 

media“command from the web client or 

operator panel to move the cartridge 

from the last destination slot to the I/E 

station. Replace the barcode label on the 

cartridge and import the cartridge back 

into the library.  

20618

Tapes that were assigned to a partition 

were in the I/E station during a 

firmware upgrade and lost their 

partition assignment.

Make sure the I/E station is empty 

before performing a library firmware 

upgrade.

20631

881498

Not all I/E station slots are available to 

all partitions. Tapes in these slots and 

assigned to a partition are seen by the 

library but may or may not be seen by 

the partition. 

Make sure the I/E station is empty 

before performing a library firmware 

upgrade. To recover from t his error, 

empty the I/E stations, change the 

number of I/E stations, then reset the 

number of I/E stations back to the 

number you want. 

Change 
Request 
Number

Service 
Request 
Number

Description

Workaround

Summary of Contents for 520G.GS003










Reviews: