Quantum Design SynactiX 5EI Page 67 Manual Download

Page: 67 / 77

Manual for SynactiX 5EP/5EI

RecoveryEasy

2.6 CHANGE PWD

Function : Changes the password to enter RecoveryEasy Partition or Recovery

User Interface.

Limitation : None.

Steps

: Follow the system prompt, input the password no more than 6

characters twice. To delete the password, follow the system prompt

and press the “Enter” key twice.

Note:

a. The password should be no more than 6 characters, only digital and alphabetic

letters are valid.

b. Once the password is enabled, users will be asked to input the password every

time they try to enter the RecoveryEasy user interfaces, and up to 3 times try is

permitted.

2.7 Others

Ctrl+Bksp : Switches to Partition User Interface.

ESC

: Exits from the Partition User Interface.

: When two or more than two hard disks are installed on the system,

use F5 key to choose the hard disk. When processing a certain hard

disk, F5 key can be used to choose the partition.

FAQ:

What does RecoveryEasy do?

RecoveryEasy creates a so-called “mirror partition” with same size for the

hard disk partition on the same hard disk, and then completely backups all the

data sector by sector to the mirror area. This mirror partition is reserved to

OS. When the OS ruins either by mistakes or virus, users can recover the

partition from its mirror.

Does RecoveryEasy occupy the system resources?

Although some hard disk data protection applications can automatically

protect the disk data in runtime, it lowers the system performance. Unlike

these applications, RecoveryEasy need users to backup or restore data

manually when needed, but it DOES NOT lower the system performance

when the system is running. It does not occupy either hard disk space or

system memory, additional floppy disk or ISA/PCI cards are unnecessary.

RecoveryEasy utilizes Build-in BIOS skill, what is build-in BIOS?

RecoveryEasy build-in BIOS means all functions of RecoveryEasy including

creating partition, backuping and restoring partition are built in BIOS. Users just

need to down load the latest BIOS from our Website (http://www.qdigrp.com)

when wanting to upgrade (It’s free!).

Summary of Contents for SynactiX 5EI














































































Search results

Summary of Contents for SynactiX 5EI

Reviews:

Related manuals for SynactiX 5EI

Brands by name

Popular brands

Quantum Design SynactiX 5EI, Manual

Search results

Summary of Contents for SynactiX 5EI

Reviews:

Related manuals for SynactiX 5EI

Brands by name

Popular brands