Manual for SynactiX 5EP/5EI
BIOS Description
l
Processor
Enabled
When Pentium III CPU is installed, the serial
Number Feature
number is readable
Disabled
The serial number is unreadable
l
Quick Power
Enabled
Allow the system to skip certain tests while
On Self Test
booting. This will decrease the time needed to
boot the system
Disabled
Normal POST
l
First (Second,
Disabled
Select Your Boot Device Priority. It could be
Third) Boot Device
Floppy
Disabled, Floppy, LS/ZIP, HDD-0, HDD-1, HDD-2,
Boot Other Device
HDD-3, SCSI, CDROM, LAN
l
Swap Floppy
Enabled
If the system has two floppy drives, choose
Drive
Disabled
enable to assign physical drive B to logical drive
A and vice-versa
l
Boot Up
Enabled
Test floppy drives to determine whether they
Floppy Seek
Disabled
have 40 or 80 tracks
l
Boot Up
O n
Select power on state for NumLock
NumLock Status
Off
l
Gate A20 Option
Normal
Let chipset control GateA20 and Normal - a pin
Fast
in the keyboard controller controls GateA20.
Default is Fast
l
Typematic Rate
Enabled
Keystrokes repeat at a rate determined by the
Setting
Disabled
keyboard controller - when enabled, the typematic
rate and typematic delay can be selected
l
Typematic Rate
6-30
The rate at which character repeats when you
(chars/sec)
hold down a key
l
Typematic Delay
250-1000
The delay before keystrokes begin to repeat
(Msec)
l
Security Option
Setup
Select whether the password is required every
System
time the system boot or only when you enter
setup
