Quantum Design SynactiX 5EI Page 52 Manual Download

Page: 52 / 77

Manual for SynactiX 5EP/5EI

QDI StepEasy

As one of the Legend QDI’s innovations, StepEasy is a powerful and efficient Easy Technol-

ogy for PC DIY fans. It provides a friendly interface for you that you can adjust the CPU

frequency conveniently and directly. It is so powerful that you can change the CPU frequency

just in a few seconds under the operating system and have no need to reset the PC or change

the jumpers. In addition, StepEasy can decrease the risk of changing the CPU frequency to

minimum. As long as you conform to the steps of tuning the CPU frequency, there is almost no

risk to adjust the frequency.

Installation

You can install the QDI StepEasy by the following two means:

1. Run CD, select the installation of QDI StepEasy, then, act step by step according to the

interface prompt.

2. Browse CD and run the setup.exe in the relative directory.

Instruction

Because there exist some risks for the CPU or the motherboard when you change the CPU

frequency, please read the following and refer to the figure above carefully before tuning the

CPU frequency.

button to get the

select frequency

button to get the

default frequency

1MHz increase

10MHz increase

1MHz decrease

10MHz decrease

StepEasy

Summary of Contents for SynactiX 5EI














































































Search results

Summary of Contents for SynactiX 5EI

Reviews:

Related manuals for SynactiX 5EI

Brands by name

Popular brands

Quantum Design SynactiX 5EI, Manual

Search results

Summary of Contents for SynactiX 5EI

Reviews:

Related manuals for SynactiX 5EI

Brands by name

Popular brands