manualshive.com logo in svg

Quantum Design SynactiX 5EI, Manual, Page: 5 / 77

Share
Download
Quantum Design SynactiX 5EI Manual Download Page 5

1. Introduction...............

......................................1

Overview.........................................................................1

Key Features...................................................................1

2. Installation Instructions

...................................4

External Connectors..................................................4

PS/2 Keyboard/Mouse Connector....................................4

USB1,2 and LAN connectors...........................................4

Parallel Port, Serial Port  Connectors...............................5

Line-in, Microphone-in, Speaker-out jack

and MIDI/Joystick connector............................................5

USB3,4 Connectors.........................................................5

Diagnostic LED Function..................................................6

ATX Power Supply Connector & Power

Switch(POWER SW)........................................................6

Hard Disk LED Connector (HD_LED)................................7

Reset Switch (RESET)............................................ ....... 7

Speaker Connector (SPEAKER).......................................7

Power LED Connector (PWR LED)...................................7

GREEN LED Connector (GREEN LED)..............................7

ACPI  LED Connector (ACPI LED)....................................7

Hardware Green Connector (SLEEP SW).......................7

Key Lock Connector (KEY LK)........................................7

Infrared Header (IrDA).................................................... 8

Fan  Connector (PWRFAN, CPUFAN, CHSFAN) ..............8

Sound Connector (PC-PCI)...............................................8

Wake-Up On LAN (WOL)....................................... .........9

Wake-Up On Internal Modem (WOM)..................... .........9

Audio Connector (CD_IN, MODEM,AUXIN).....................10

4 pin SMBus Connector(SMBUS)...................................10

Communication and Networking Riser Interface

Connector(CNR).............................................................11

Chassis Security Switch (CHSSEC)..............................11

Expansion Slots & I/O Ports description........................12

C O N T E N T S

Summary of Contents for SynactiX 5EI














































































Reviews:

No comments