Quantech QTC2015T, Manual, Page: 13 / 72

FORM QTC2-eg1 (515)
QUANTECH 13
NoTES:
1. For leaving brine temperature below 40°F (4.4°C), contact your nearest Quantech Sales Office for ap -
plication requirements.
2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest Quantech Sales Office for
application guidelines.
3. The evaporator is protected against freezing to -20°f (-28.8°C) with an electric heater as standard.
4. for operation at temperatures below 25°f (-3.9°C), the optional low Ambient Kit will need to be installed
on the system (for QTC2040T-045T models only).
5. for operation at temperatures above 115°f (46.1°C), the optional high Ambient Kit will need to be in-
stalled on the system.
Design Parameters
QTC2 ENGLISH
MODEL
LEAVING WATER
TEMPERATURE (°F)
COOLER
FLOW (GPM)
AIR ON
CONDENSER (°F)
MIN MAX MIN MAX MIN MAX
015T
40 55 10 150 0 125
020T 40 55 10 150 0 125
025T 40 55 10 150 0 125
030T
40 55 10 150 0 125
035T 40 55 40 200 0 125
040T 40 55 40 200 0 125
045T
40 55 60 300 0 125
QTC2 SI UNITS
MODEL
LEAVING WATER
TEMPERATURE (°C)
COOLER
FLOW (L/S)
AIR ON
CONDENSER (°C)
MIN MAX MIN MAX MIN MAX
015T 4.4 12.8 0.6 9.5 -17.7 51.7
020T 4.4 12.8 0.6 9.5 -17.7 51.7
025T
4.4 12.8 0.6 9.5 -17.7 51.7
030T 4.4 12.8 0.6 9.5 -17.7 51.7
035T 4.4 12.8 2.5 12.6 -17.7 51.7
040T
4.4 12.8 2.5 12.6 -17.7 51.7
045T 4.4 12.8 3.8 18.9 -17.7 51.7