Quantech QCC2015CEE, Installation, Operation And Maintenance Manual, Page: 132 / 172

QUANTECH
132
Form QCC2-NM1
Issue Date: 5/20/2021
SECTION 7 – UNIT CONTROLS
Table 15 -
Options Key Programming Quick Reference List
Table 15 provides a quick reference list for the OPTIONS key setpoints.
LD13348
R410A
Options Key
(Press Options Key
to Adv.)
Display Language
Expansion Valve Type
(Thermoplastic or Electric)
(Programmed Under Service
Mode, Viewable Only)
Must be Programmed
for Thermostatic
Flash Card Update
Remote Temp Reset
Ambient Control
(Standard or Low)
Local/Remote Mode
Unit Control Mode
(DAT or Suct Press)
Display Units
(English or Metric)
System Lead/Lag Control
(Manual or Automatic)
Fan Control Mode
Manual Override Mode
Current Feedback Option
Soft Start Option
Power Failure Restart
Unit Type
"Condensing Unit" MUST be
Selected Via Jumper Installed
(Viewable Only)
Refrigerant Type
(Programmed Under Service Mode)
(Viewable Only
System Switches
On/Off
Hot Gas Bypass Type
Data Logging
Flashcard Card Update
Flashcard Data Logging
Remote Temp Reset