Qualis Audio Sentine, User Manual, Page: 79 / 108

Settings page 73
corresponding Enable box. This button is disabled while modi-
fying settings.
Device name The device name is used in alarm email messages to
identify the Sentinel from which the alarm originated. Limited to
16 characters.
Manually Assert Outputs Forces the auxiliary alarm outputs to a low
state (useful for testing connections). This overrides the alarm
controls.
Date & Time settings panel
The Date & Time settings panel configures the network time service
and time zone settings.
The Sentinel has an internal real-time clock, used to accurately record
the timing of measurements. To provide an unambiguous reference,
times are recorded in Coordinated Universal Time (UTC), and the Sen-
tinel can synchronize the clock to a Network Time Protocol server. UTC
times are converted to local time for display using configured timezone
settings.
Server DNS name of the NTP server that will supply time information to
the Sentinel. An IPv4 address is also allowed. An empty name
disables NTP clock synchronization. Limited to 34 characters.
Timezone Local timezone for the Sentinel.
DST Checked if Daylight Savings Time is in effect for the local time
zone. The Sentinel does not automatically switch to or from day-
light savings.