Qualis Audio Sentine, User Manual, Page: 54 / 108

48 User Manual
Errors panel
The Errors panel provides a concise view of all potential errors mea-
sured by the Sentinel. Unlike the warnings overlaid on the bargraphs,
there is no prioritization applied to the error summary.
These are the icons used to indicate error conditions:
No active error.
Active error.
Recent error. Hold time set in the configuration pulldown menu
for the Errors Panel.
Channel Errors
The Channel Errors section displays a matrix of per-channel errors.
There is a column for each channel in the configured surround format
and a row for each error. The displayed errors and their sources are:
Clip The true peak level is above the User Clip Level. The User Clip
Level is set in the Levels & Metering settings panel (p. 62).
Over The metered level is above the Overload Level. The Overload
Level is set in the Levels & Metering settings panel (p. 62).
Under The loudness is below the allowed threshhold. The Threshold is
set in the Loudness settings panel (p. 64).
Hum There is an AC mains frequency component present. The
threshold is set in the Channel Analysis settings panel
(p. 67).
Bandwidth The LFE channel bandwidth exceeds the maximum.
The maximum is set in the Channel Analysis settings panel
(p. 67).
Repeat The audio stream repeats a constant value across consecutive
samples. The repeat threshhold is set in the Channel Analysis
settings panel (p. 67).
Valid The validity error flag is asserted.