Qualis Audio Sentine, User Manual, Page: 76 / 108

70 User Manual
DC Inputs & Temperature settings panel
The DC Inputs & Temperature settings panel sets the limit thresholds
for the 6 DC inputs and the internal temperature sensor. These have
no duration setting – if a threshold is crossed, an error is immediately
asserted.
Report An Error if
DC In # Is Above Sets the maximum DC value allowed on that input
before issuing an error. The value may be set between 0.30V
and 2.55V in 0.15V steps. Set this to 2.55V to disable this com-
parison.
Or Below Sets the minimum DC value allowed on that input before issu-
ing an error. The value may be set between 0.0V and 2.25V in
0.15V steps. Set this to 0.0V to disable this comparison.
Temperature Is Above Sets the maximum temperature allowed before
issuing an error. The value may be set between 32° C and 62°
C in 2° steps.
Or Below Sets the minimum temperature allowed before issuing an error.
The value may be set between 4° C and 19° C in 1° steps.
See Auxiliary signals connection (p. 14) for details about connecting
these inputs.
Error reporting for each auxiliary input is enabled in the Alarms settings
panel (p. 71).