Qualis Audio Sentine, User Manual, Page: 77 / 108

Settings page 71
Alarms settings panel
Alarms are the result of one or more error conditions. Four alarms are
available, numbered 1-4, and each may have any combination of errors
assigned to it. When an error occurs, it triggers any alarms to which it
is assigned. Triggering an alarm results in actions based on settings in
the Alarm Actions settings panel (p. 72).
The Alarms settings panel has a column for each of the four alarms. It
has a row for each type of detected error. Within each column, checked
boxes indicate the errors assigned to the alarm.
Signal Errors
Under Level Enables reporting of under-level errors.
Over Level Enables reporting of levels exceeding the specified operat-
ing level.
Clipping Enables reporting of channel clipping.
Hum Enables reporting mains hum errors.
Program Loudness Enables reporting of short-term loudness exceeding
the maximum allowed.
Integrated Loudness Enables reporting of integrated loudness being
outside the allowable tolerances.
Downmix Compatibility Enables reporting of stereo and mono downmix
compatibility errors.
Channel Swap Enables reporting of interchanged channels.
LFE Bandwidth Enables reporting of excessive LFE bandwidth.
Digital Interface Errors
Input Connections Enables reporting of digital input link errors.
Group Consistency Enables reporting of cross channel format inconsis-
tencies.
Input Metadata Enables reporting of individual channel metadata errors.
Group Metadata Enables reporting of cross channel metadata inconsis-
tencies.
Coded Audio Errors Enables reporting of packet coding errors.
Coded Audio Metadata Enables reporting of errors in the coded audio
metadata