Qualis Audio Sentine, User Manual, Page: 52 / 108

46 User Manual
Defined segments
You create defined segments through the user interface. Loudness
measurements for defined segments are calculated within the user
interface from saved log data and are recalculated when the segment’s
bounds change, so they update in real time.
Each has a corresponding pair of bounds cursors displayed on the
readings timeline. You can change a segment’s beginning and ending
times by moving its bounds cursors or by editing the begin time, end
time or duration displayed on its segment table entry.
Defined segments may also appear on the Signal Histogram panel
(p. 47).
Defined segments are numbered for identification. These numbers are
displayed both in the segment table and on the segment’s bounds cur-
sors. Numbers are assigned consecutively, starting at one. Adding or
deleting segments can cause renumbering. Changing a segment’s
beginning or ending time can change its position in the table, which
can also cause renumbering.
Combined measurements for defined segments are displayed as a final
entry in the segment table. The segment category setting for a defined
segment specifies how the segment contributes to these summary
measurements:
Add to summary.
Exclude from surrounding segment.
Ignore.