Qualis Audio Sentine, User Manual, Page: 67 / 108

Settings page 61
Alarm Actions settings panel (p. 72)
Selects notification
actions for each alarm. Includes setup of email server.
Date & Time settings panel (p. 73)
Configures network
time service and time zone.
Input & Sources settings panel
The Input & Sources settings panel selects the program format and
channel mapping.
Use Input From Selects the module to use for measurements. The mod-
ule in the slot closest to the side of the Sentinel is Module 1, in
the middle is Module 2. The menu only allows installed modules
to be selected. Following menu items are tailored to match the
selected module's type: Analog, AES or SDI.
Digital Mode Appears when a digital module is selected with the Use
Input From field. For AES input modules it selects between the
PCM signals on the AES In/Out connector and coded audio
signals on the AES In connector. For SDI input modules it
selects between PCM signals on the SDI connector, coded
audio signals on the SDI connector and PCM signals on the
AES In/Out connector.
SDI Group Appears when a SDI module is selected with the Use Input
From field and the PCM over AES mode is not used. It selects
which two of the SDI groups are monitored.
Coded Source Appears when Coded Audio is selected with the Digital
Mode field. It selects which of the four channel pairs drive the
Dolby decoder and also drive the coded audio output on the
AES In/Out connector.
Surround Format Selects the format for the surround program and the
presence or absence of additional channels. The choices are:
5.1 Ch. 5 surround channels with LFE
6.1 Ch. 6 surround channels with LFE
7.1 Ch. 7 surround channels with LFE
5.1 + 2 5 surround channels with LFE and 2 ancillary channels
6.1 + 1 6 surround channels with LFE and 1 ancillary channel
Channel Source Selects the source of signal for the indicated channel.
( Channel is one of LF, RF, CF, LFE, LS, RS, LB, RB.) It is possi-