QuadroM32x Manual I: Installation Guide
Appendix: Configuring NAT Traversal
Fig. I-42: NAT Traversal Settings – General Settings
Go to SIP Parameters page.
Fig. I-43: NAT Traversal Settings - SIP Parameters
Select Use Manual NAT Traversal and enter the WAN IP address of the router into the
Mapped Host text field. For Mapped Port, enter the router's corresponding port num-
ber, in this case 5060. Save the entries.
•
Go to the RTP Parameters page and select Use Manual NAT Traversal.
Fig. I-44: NAT Traversal Settings - RTP Parameters
•
Enter the WAN IP address of the router into the Mapped Host text field. Set the
Mapped RTP/RTCP Port Range according to the values specified on the router, in this
case to 6000 (Min) and 6199 (Max), respectively. Click the Save button to save the
contents.
The Quadro will activate the settings and register the extensions on the Epygi SIP Server
after a few minutes. You can verify the settings from the main Quadro Management menu
under Status in the SIP Registration Status section.
QuadroM32x; (SW Version 5.2.x)
46
Summary of Contents for QuadroM32x
Page 1: ......
