QuadroM32x Manual I: Installation Guide
Step 2: Configuring the Quadro
Fig. I-31: Trunk T1 Signaling Type CCS - B-Channels Edit page
Signaling Type CAS
Fig. I-32: Trunk T1 Signaling Type CAS page
If you selected CAS as your Signaling Type on the Trunk Settings - Edit Entry page, you
will get the page shown above using the Trunk link.
The Incoming Interdigit Service link leads to the page where the dial plan for incoming
E1/T1 calls from CO/PBX to the Quadro can be configured. The Incoming Interdigit Ser-
vice is used to configure E1/T1 dial plan for the incoming calls from CO/PBX to the Qua-
dro. This service allows you to speed up the call establishment procedure by detecting the
prefix. The calls will be speed up by the timeout defined in the Incoming Digits Timeout
text field (see below). Consult with your CO before making changes in the E1/T1 dial plan.
In the Incoming Digits Timeout text field the time period may be specified, during which
incoming digits from the destination party calling Quadro will be collected before being ap-
plied as an incoming called number. Values between 0 and 20000 (in milliseconds) are re-
quired.
The Signaling Standard drop down list is available only in E1 mode and allows selecting
the connection signaling standard (ITU, ITU_T_2 or MELCAS).
QuadroM32x; (SW Version 5.2.x)
36
Summary of Contents for QuadroM32x
Page 1: ......
