QuadroM32x Manual I: Installation Guide
Step 2: Configuring the Quadro
Finishing the System Configuration Wizard
Fig. I-15: System Configuration Wizard finishing page
Click on Finish to complete the System Configuration Wizard. The Quadro will then stop in-
ternal functions and apply the changes made in the Wizard.
Fig. I-16: Wizard Execution Progress page
After this is complete, the Quadro will reply with the Confirm Settings page requesting
confirmation of the changes. Press on OK to confirm the settings.
Fig. I-17: Confirm Settings page
Please Note:
You must confirm the settings within 20 minutes. Otherwise the device will
revert back to the previous configuration and reboot.
Please Note:
If you do not use DHCP for your LAN and you have changed your LAN set-
tings, make sure that the IP address of the PC connected to Quadro is still within the speci-
fied IP address range, otherwise your PC may not establish a connection to Quadro.
If you changed the network configuration of the LAN, restart your LAN connection to re-
ceive a new IP address from the new network. Then you can access the Web Management
of the Quadro on the new IP address you’ve assigned to the Quadro.
QuadroM32x; (SW Version 5.2.x)
20
Summary of Contents for QuadroM32x
Page 1: ......
