Quadro PG-B235, User Manual

Page: 4 / 24

ENGLISH
- 3 -
• Should you decide not to use the appliance again, remove the plug from the socket and cut the supply
cable to render the appliance completely inoperative.
• Installation must be carried out according to the manufacture's instructions.
• The supply cable must not be replaced by the user, as this requires the use of special tools, if the supply
cable is damaged, contact an authorized service personel.
• Do not fill the appliance under a running tap.
• Do not allow the supply cable to come into contact with the ironing plate.
• If the safety cutout intervenes, the iron will no longer function. To repair this, contact the authorized
service personel.
• Never direct the steam jet in the direction of people, as this may be extremely dangerous.
• Do not use the iron on very wet fabrics.
• Do not overfill the water tank and do not add stain-removers or similar products to water.
• Remove the plug from the power supply when the appliance is not in use. Do not leave the appliance
switched on unnecessarily.
Before ironing, check that the garment to be ironed is suitable for steam ironing.
How to use
Before first use
• It’s normal fo a small amount of smoke to be produced the first time, this will quickly disappear.
• When using the steam function for the first time, do not direct the steam towards the laundry, as there
could be debris from the steam vents.
Filling with water
• We recommend the use of distilled water.
• Make sure that both the steam control turning knob (C) and
temperature control dial (I) are in “OFF” position.
• Hold the iron upright so that the water-filling inlet (B) is in a
horizontal position.
• Fill the water through water filling inlet untill the water reach
the “MAX” mark indicated on the side of the iron, and never
fill above this mark.
Setting the temperature
Follow the ironing instructions on the garment label. If there is no instruction, but you do know the type of
fabric, please, consult the following table.
Note: If the fabric consists of various different fabrics, always set the ironing temperature required by the
most delicate fabrics.
Fabric
Synthetic
Silk, wool
Cotton, linen
Temperature control
MAX
Temperature requirement
Low temperature
Medium temperature
High temperature