background image

12

  Quadratec

®

 Exclusive 

 

 

Limited Lifetime Warranty

 

 

Your Quadratec® branded accessories are covered
by the following 

Limited Warranty

   provided

exclusively by Quadratec, Inc., 
1028 Saunders Lane, West Chester PA 19380.

This Limited Warranty is the only warranty made 
in connection with your purchase. 
Quadratec  neither assumes nor authorizes any 
vendor, retailer or other person or entity to assume 
for it any other obligation or liability in connection 
with this product or Limited Warranty. This 
Limited Warranty does not apply and is not 
cumulative to any accessory or part distributed by
Quadratec for which the Manufacturer provides a
separate written  warranty. 

What is Covered: 

Subject to the terms, exclusions 

and limitations herein and with respect only to 
Quadratec branded accessories first sold in the 
United States, Quadratec warrants to the 
initial retail purchaser only that your Quadratec 
accessory shall be free of defects in material 
and workmanship: 

for as long as the original 

purchaser owns the vehicle. The Warranty on 

bushings and other serviceable wear items 

(including shock absorbers) is limited to 1 year

 from date of retail purchase.

 This Limited 

Warranty is not assignable and shall terminate 
upon sale of the vehicle upon which the 
Quadratec accessory is installed or other transfer 
third persons.

All other warranties are hereby disclaimed, 
except to the extent prohibited by applicable 
law in which case any implied warranty of 
merchantability or fitness for a particular purpose 
on this limited to 

for as long as the original 

purchaser owns the vehicle.

 Quadratec reserves 

the rights to: (a.) require invoice or other proof 
your accessory is within the terms of this Limited
Warranty as  a condition of warranty service and, 
(b.) make future revisions to this product and 
Limited  Warranty without prior notice or 
obligation  to upgrade your product.

What is Not Covered:

Your Quadratec Limited Warranty does not cover 
products or parts Quadratec determines to have 
been damaged by or subjected to: (a.) installation 
damage, alteration, modification, combination 
with other parts, failure to maintain or improper 
repair or service, (b.) defects or use which pre-dates
 installation of Quadratec® accessory  

or suspension kit by authorized dealer or shop, (c.)
normal wear & tear or gradual reduction 
in expected performance of vehicle or components,
 (d.) emissions control or electronic stability 
systems or components, (e.) cosmetic damage or
 damage from moisture or water immersion,
(f.) fleet, rental or commercial use, (g.) Acts of 
God, accidents, misuse, negligence, inadequate 
mounting or impact with vehicle(s), obstacles  or
 other aspects of the environment, (h.) theft,
 vandalism or other intentional damage. (i.) use in 
competition or racing.  

Other Exclusions:

 Surface

 finish of exposed suspension components is not 
covered under this Limited Warranty.
 

Remedy Limited to Repair/Replacement:

The exclusive remedy provided hereunder shall, 
upon Quadratec inspection and at  Quadratec’s  
option, be either repair or replacement of product 
or parts (new or refurbished) covered under this 
Limited Warranty. Customers requesting warranty 
consideration should first contact Quadratec to 
obtain a RGA number (610-701-3336).
 All labor, removal, shipping and installation costs 
are customer’s  responsibility.

Other Limitations - Exclusion of Damages

- Your Rights Under State Law:

In consideration of the purchase price paid, 
neither Quadratec nor any independent Quadratec
 distributor/licensee are responsible for 
any time loss, rental costs, or for any incidental, 
consequential, punitive or other damages you may 
have or incur in connection with any part or 
product purchased. Your exclusive remedy 
hereunder for covered parts is repair/replacement 
as described above.  This Limited Warranty gives
 you specific rights. You may also have other 
rights that vary from state to state. For example, 
some states do not allow limitations of how 
long an implied warranty lasts and /or do not 
allow the exclusion or limitation of incidental or 
consequential damages, so  the limitations and 
exclusions herein may not apply to you.  

©Quadratec, Inc. 2020. All Rights Reserved.
4.24.20   LTR Version          Part #12999.3166

QJL_1.75_LIFT_16400_0010_LTR.indd   12

QJL_1.75_LIFT_16400_0010_LTR.indd   12

9/11/20   1:33 PM

9/11/20   1:33 PM

Summary of Contents for 16400.0010













Reviews: