9
1.75” Coil Spacer Lift Kit Installation: Rear
Loosen the rear track bar at both the
frame and axle using a 21mm socket and
wrench. (FIG 21) Remove bolt from the
axle end and save hardware.
Loosen the lower control arms at both
the frame and axle using a 21mm socket
and wrench. (FIG 22)
FIG21
FIG22
ALWAYS SUPPORT FRAME RAILS USING JACK STANDS.
Moving to the rear of the vehicle; use
a wheel chock on the front tires to
prevent the vehicle from rolling forward
and release the emergency brake.
Raise the rear of the vehicle and support
frame rails using jack stands. Do not lower
the axle at this time. Remove wheels/tires.
Loosen the upper control arms at both the
frame and axle using a 21mm socket and
wrench. (FIG 23)
Disconnect the shocks from the axle using
a 18mm socket and open end wrench.
Save hardware. (FIG 24)
FIG23
FIG24
QJL_1.75_LIFT_16400_0010_LTR.indd 9
QJL_1.75_LIFT_16400_0010_LTR.indd 9
9/11/20 1:31 PM
9/11/20 1:31 PM
