6
1.75” Coil Spacer Lift Kit Installation: Front
Using pliers, squeeze the clamp and
remove the axle vent hose. On Rubicon
models, slide the gray tab, squeeze and
remove the axle locker harness plug.
Remove the harness from the upper control
arm using a trim removal tool. (FIG 13)
On the passenger side, slide the gray tab,
squeeze and remove the axle disconnect
harness plug. Remove the harness from
the axle housing and upper control arm
using a trim removal tool. (FIG 14)
Disconnect the brake line brackets from
the lower control arm using a 15mm
socket. (FIG 11) Save hardware.
Disconnect the brake line bracket from
the coil spring mount using a 10mm
wrench. (FIG 12) Save hardware.
FIG11
FIG12
FIG13
FIG14
FIG15
Remove factory coil spring isolator and
replace it with provided coil spacer.
Make sure both posts are properly
indexed in the frame holes on the
spacer. (FIG 15)
QJL_1.75_LIFT_16400_0010_LTR.indd 6
QJL_1.75_LIFT_16400_0010_LTR.indd 6
9/11/20 1:30 PM
9/11/20 1:30 PM
