Quadratec 16400.0010, Installation Manual, Page: 5 / 12

5
Disconnect the front sway bar end links
at the axle using a 18mm socket and open
end wrench. Save hardware. (FIG 7) Remove the sway bar link from the sway
bar using a 18mm wrench and 6mm allen
wrench. (FIG 8)
Loosen the lower control arms at both
the frame and axle using 21mm & 24mm
sockets and wrenches. (FIG 5) Loosen the upper control arms at both
the frame and axle using a 18mm
socket and wrench. (FIG 6)
1.75” Coil Spacer Lift Kit Installation: Front
FIG5 FIG6
FIG7 FIG8
Disconnect the shocks from the axle
using a 18mm socket and open end
wrench. Save hardware. (FIG 9) Remove the shocks from the frame using
a 18mm socket. (FIG 10) Save hardware.
FIG9 FIG10
QJL_1.75_LIFT_16400_0010_LTR.indd 5 QJL_1.75_LIFT_16400_0010_LTR.indd 5 9/11/20 1:29 PM 9/11/20 1:29 PM