R
September 24, 2015
7014-188L
Page 25
1200-I Pellet Insert
Panel Locator Hole
5. Hold side curtains in open position and lower panel set
over insert setting lower edge of top panel in slot between
hopper lid and panel support as shown in
Figure 25.1
.
Place existing screw head (installed in
Figure 25.2
) into
locator hole in fl oor of insert.
Figure 25.2.
6. Lift hopper lid and press down on panel top while installing
(4) 8-32 x 3/8 inch screws into holes in panel support. (If
screws have been factory installed, tighten to secure panel
to panel support.) Return hopper lid to closed position.
7. Install a corner bracket on each side trim piece. Slide
brackets into top trim from each side and secure with
fl athead screwdriver. Attach trim assembly to panel set
as follows:
a. Ensure that brackets face towards the back.
b.
Align trim assembly to panel set sides and slide down.
Figure 25.1
Figure 25.2
Figure 25.3
F. Panel and Trim Set (Cont’d)
Figure 25.5- Completed View
View of "L" Bracket
installed
Figure 25.4
Summary of Contents for PELLET INSERT CB1200MI-MBK
Page 52: ...Page 52 7014 188L September 24 2015 R 1200 I Pellet Insert F Warranty Policy ...
Page 53: ...R September 24 2015 7014 188L Page 53 1200 I Pellet Insert ...
Page 54: ...Page 54 7014 188L September 24 2015 R 1200 I Pellet Insert ...
Page 55: ...R September 24 2015 7014 188L Page 55 1200 I Pellet Insert ...