6
7082-132C
June 18, 2014
MT. VERNON E2 INSERT
D. Quick Start Guide
Ru
n
Se
t Up
Pr
im
e
1. Empty
Firebox
2.
Add pellets and close lid
3.
Turn DIAL to OFF
4.
Plug in the appliance
• Exhaust blower will run for about 45 Seconds (
wait for it to stop
before priming)
• Green light will start fl ashing
5.
Put batteries in the Touch Screen Remote Thermostat
6.
Press the MODE button on the remote thermostat until ON appears
in the upperleft corner
• You should hear an audible tone from the appliance
1. After the exhaust blower has stopped; quickly turn the dial from OFF to HI
two times
• The LIGHT will turn solid green and pellets will feed. Wait for 2 minutes
• If the LIGHT did not turn solid green:
- Turn dial back to OFF
- Unplug appliance, plug it back in and repeat
Priming is only needed for fi rst fi re or starting fi re on empty hopper.
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
2. Choose Setting:
LO – HI*
Green LIGHT will be-
gin fl ashing and stove
will start
It may take as long as 10
minutes to achieve a fi re
in the fi repot. Turning the
knob or thermostat to off
during this time will inter-
rupt the startup process.
*For fi rst fi re,
HHT recommends
running on HI for
fi rst 30 minutes
0
-
1
-2
-3
-4
+1
+2
+3
+
4
ALARM
ON
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
MODE/SET
1. Choose Mode:
ON
or
THERM
-pick “Temp”
Touch Screen
Remote Thermostat
Control Panel
Light
Dial
Trim
