![background image](http://html2.mh-extra.com/html/quadra-fire/cb1200m-mbk/cb1200m-mbk_installation-manual_3416015018.webp)
18
7014-258B
November 30, 2017
CB1200 FREESTANDING
C.
Through The Wall & Vertical - Exterior
Figure 18.1
Figure 18.2
D. Vertical - Interior - Typical Installation
Figure 18.3
Firestop
Flashing
Rain Cap
6 in.
(152mm)
Min.
Non-combustible Hearth Pad
3 in. (76mm)
Min.
Clean-out
Cover
24 in. (610mm)
minimum
Ceiling Support
Class A Chimney
Connector Adapter
Top Vent Kit
Non-combustible Hearth Pad
Clean-out Cover
Tee
Wall Thimble
Support Bracket
every 60 in. (1524mm)
24 in. (610mm)
Minimum
Rain Cap
Flashing
2 in. (51mm) Minimum
6 in. (152mm)
Minimum
Firestop
Flashing
Rain Cap
6 in.
(152mm)
Min.
Non-combustible Hearth Pad
3 in. (76mm)
Min.
24 in.
(610mm)
Minimum
3 in. to 3 in.
(76-76mm)
Top Vent Kit
Clean-out Cover
All three installations are approved for mobile home installa-
tions. Must use 3 or 4 inch (76 to 102mm) “L” or “PL” Listed
pellet venting or Listed double wall pipe and Quadra-Fire
Outside Air Kit in mobile homes. Single wall pipe is approved
for residential installations only.
*NOTE: Clearance to combustibles are for standard pellet
pipe. If pellet pipe manufacturer allows reduced clearances
to their pipe, reduced clearances are allowed.
B.
Vertical into Existing Class A Chimney
NOTE:
A chimney connector shall not pass through an attic or
roof space, closet or similar concealed space, or a foor or
ceiling.