quadient iX-7PRO Series User Manual Download Page 375

Page: 375 / 564

How to Adjust the Sealing Water Flow

Before you adjust the sealing water flow, make sure that the brushes and sponge are

clean.

To adjust the sealing water flow:
1.

Set the water flow using the back lever.

When standing in

front of the feeder

- Push the lever towards the left-hand side to increase the water level.
- Push the lever towards the right-hand side to decrease the water level.

How to Clean the Feeder Belts and Rollers

Follow the steps below to clean the belts and rollers of the feeder and of the Dynamic

Scale (if installed).

To clean the feeder belts and rollers:
1.

Open equipment covers; in the Mixed-Size Feeder, press the left of the upper blue

handle to release and lift up the drive assembly.

Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton

applicator.

Push down the upper drive assembly until it locks back into position and close the

feeder cover.

370

| Page 370 | Apr-15-2022 12:02 |

Maintaining

Summary of Contents for iX-7PRO Series





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands

quadient iX-7PRO Series, User Manual

Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands