quadient iX-7PRO Series User Manual Download Page 372

Page: 372 / 564

Sealer

12.2

How to Fill the Sealer Bottle

The Automatic Feeder uses water for sealing envelopes.
If the system is out of water, the mailing process continues but the envelopes will not

sealed properly.

To add water (or sealing solution) to the bottle:
1.

Remove the bottle from its base and turn it over.

Unscrew the cap and fill the bottle with water up to the limit marks.

Screw the cap back and put the bottle back into place.

How to Turn the Sealer On/Off

You can activate or deactivate the Sealing Function as needed.

The

Sealing On

/Off

icon in the Home Screen indicates the current state

of the Sealing Function.
Sealer may be inactive by default. To set the default Sealing Setting, see supervisor

setting

How to Set the Default Sealing Mode

on page 311.

Do not insert envelopes already sealed in the Feeder when the

Sealing Function is ON: the envelopes could jam.

To turn sealing on/off:
1.

On the Control Panel:

367

| Page 367 | | Apr-15-2022 12:02 |

Maintaining

Summary of Contents for iX-7PRO Series





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands

quadient iX-7PRO Series, User Manual

Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands