quadient iX-7PRO Series User Manual Download Page 256

Page: 256 / 564

Testing the Connection to Online Services

9.3

You may test the connection to the Online Services server via the commands in the

Online Services menu:

• Ping server

Establishes a connection and checks whether the server answers to a 'ping'

command. This test:

- Validates connection parameters (see

Connection Settings

on page 313).

- Indicates that the server can be contacted.

• Test server

Establishes a connection and tests the communication dialog with the server.

This test indicates that transactions can be held normally.

Test server is a bandwidth test and should only be undertaken

after a request from Customer Service.

Ping Server Diagnostic Test

Sends a message to a server (if connected) to check the line.

To ping the server (as a User):
1.

From the home screen:

Press

and select the path:

Online Services

Select

Ping Server

from the list displayed on the screen.

251

| Page 251 | | Apr-15-2022 12:02 |

Online

Services

Summary of Contents for iX-7PRO Series





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands

quadient iX-7PRO Series, User Manual

Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands