quadient IS-460 User Manual Download Page 240

Page: 240 / 246

Specifications

237

Recommended Operating Conditions

Temperature and Relative Humidity

Your Mailing System should only be operated in the following conditions:

Weighing accuracy

Dynamic Scale Environment

12.2 Recommended Operating

Conditions

Temperature range

Ambient temperature: +10°C - +40°C.

Relative humidity

80% max. without condensation.

To obtain the best weighing results, use a solid and steady

table:

•

Away from any doors

•

Away from any fan

The Dynamic Scale uses optical sensors: do not install it in an
area exposed to excessive light or heat sources.

DELTA3_UK.book Page 237 Lundi, 29. octobre 2012 6:29 18

Summary of Contents for IS-460























































































































































































































































Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands

quadient IS-460, User Manual

Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands