quadient IS-460 User Manual Download Page 162

Page: 162 / 246

Configuring your Mailing System

159

Settings Overview

This section describes two types of settings that are available on your system:

•

User settings, that only last as long as the user who applies them is logged in

•

Supervisor settings, sets the default or permanent settings of your Mailing System.

User Settings

The user settings described in the sections below are:

•

Setting the display language

•

Adjusting the screen contrast

•

Enabling/disabling key beeps and warning/error beeps.

Supervisor Settings

Your Mailing System has one supervisor PIN code that allows you to configure the

default settings and perform other functions such as managing accounts and access

rights, generating certain reports, etc.

The supervisor settings allow you to:

•

Change the default user settings

•

Modify system time-outs

•

Set credit warnings (high amount, low credit) and activate a credit PIN code

•

Define a default weighing method for mailing, and calibrate the weighing devices

•

Design a default imprint (rate, ERA, slogan), activate the Automatic Date Advance

function and set a default printing offset

•

Activate sealing mode as default setting

•

Enter connection parameters.

8.1

Settings Overview

Other user settings are described in the corresponding sections:

Processing Mail

p.27,

Maintaining your Mailing System

p.207,

etc.

The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.

DELTA3_UK.book Page 159 Lundi, 29. octobre 2012 6:29 18

Summary of Contents for IS-460























































































































































































































































Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands

quadient IS-460, User Manual

Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands