quadient IS-460 User Manual Download Page 206

Page: 206 / 246

Options and Updates

203

Adding or Deleting PPIs

You can add PPIs to the machine using an USB memory key as follows.

How to Add or Delete PPIs

How to Add or
Delete PPIs

To add a PPI:

Display the list of PPIs (see

How to Display the List of PPIs

p.202.

Select > Add new and connect the memory device to an USB
port of the machine (on your left hand side at the rear of the

base: see

Connectors

p.20).

Press [OK]. The USB memory key content is displayed.

Select a PPI to load into the machine an press [OK].
The PPI list is updated with the new PPI.

To delete a PPI:

Select the PPI to delete and press [OK].

Confirm deletion, otherwise press

The system updates the PPI list.

DELTA3_UK.book Page 203 Lundi, 29. octobre 2012 6:29 18

Summary of Contents for IS-460























































































































































































































































Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands

quadient IS-460, User Manual

Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands