quadient IS-460 User Manual Download Page 61

Page: 61 / 246

Processing Mail

In other modes (Manual weight entry

, No weight source).

From the [PPI] home screen, to print postage on mail pieces:

Press

. System motors start running.

Insert the mail piece into the
mail path against the rear-

guide wall, side to be printed

facing upwards.
The Mailing System applies

postage and the mail piece

(or label) is sent to the catch

tray.

Otherwise, if you want to print several identical labels:

Press

and enter the number of labels.

Make sure the labels are available in the label dispenser (see

Filling the Label Dispenser

p.80).

Press

to print the labels.

If mail piece is bigger than mail path maximum thickness (see

Mail Specifications

p.235), press

before you press

print a label. The label is printed at once.If mail piece is bigger
than mail path maximum thickness (see

Mail Specifications

p.235), you may use a label tape.

When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.

DELTA3_UK.book Page 58 Lundi, 29. octobre 2012 6:29 18

Summary of Contents for IS-460























































































































































































































































Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands

quadient IS-460, User Manual

Search results

Summary of Contents for IS-460

Reviews:

Related manuals for IS-460

Brands by name

Popular brands