quadient IS-350 Page 83 User Manual Download

Page: 83 / 212

Guidelines to Setup an Account

5.3

See also

•

Selecting an Account Mode

on page 77.

Setting up 'No Account'

The 'No Account' mode provides users with unlimited access to the system (self-service

type).
This is the default mode in your Mailing System.

Implementing 'No account'

• Follow the procedure

How to Display and Change the 'Account Mode'

on page

82 and select the 'No Account' mode.

'No Account' Management Menu

In 'No Account' mode:

No other setting is necessary for the 'No Account' mode.

Setting up 'No Account with Access Control'

If you want to prevent unauthorized use of the Mailing System and do not want to use

accounts, use the 'No Account with Access Control' mode. This provides a single PIN

code for all authorized users.

| Page 78 | Jul-24-2023 01:56 |

Managing

Accounts

and

Assigning

Rights

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands