quadient IS-350 Page 38 User Manual Download

Page: 38 / 212

Press

to wake-up the system.

The system may display one of the following screens:

Home Screen [Normal]

Account Screen

If the following screen is displayed:

- Homescreen [Normal]: If this screen is displayed, no other step is required

to navigate through the system.

- Login Screen: If the Login screen is displayed, enter your PIN code.
- Account Screen: If the Account Screen is displayed, select your account as

follows.

- Use up and down arrows (use double arrows to scroll list) and press

[OK]

to validate

- You can also use a barcode scanner (option) to select your account.

The Homescreen [Normal] page is displayed. The work session starts.

Processing

Mail

| Page 33 | Jul-24-2023 01:56 |

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands