quadient IS-350 Page 153 User Manual Download

Page: 153 / 212

Postage Imprint Default Settings

8.9

The settings of the postage imprint 'by default' include:

•

Imprint default settings

: sets the default rate, text and slogan for mailing

operations.

•

Printing offset

: sets the default offset print offset from the right side of the

envelope.

Imprint Default Settings

You can set default parameters for the imprint elements that follow:

• Rate
• Text
• Slogan

On list screens, a mark

indicates the default parameter.

Changing the Default Rate

Use the procedure below to change the rate the machine activates at start-up.

How to Change the Default Rate

To change the default rate:
1.

As supervisor (see

How to Log in as Supervisor

on page 130):

Press

and select the path:

Default user settings

Default imprint

parameters

Default rate

Press

[OK]

and select the default rate using the rate wizard.

Press

[OK]

to validate.

See also

•

Managing Postal Rates

on page 171.

148

| Page 148 | Jul-24-2023 01:56 |

Configuring

your

Mailing

System

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands