Quaddrix QT-220EX, User Manual

Page: 12 / 69

12
6. Adjust clips .
Adjust the height of the three mounting
clips. Swing the three mounting clips to
adhere to housing.
7. Install housing.
Push housing into ceiling and
let the clips stretch out. Finally,
screw the three clips to tighten
the housing.
NOTE:
Use even strength to
adjust the three clips, or it may
distort the shape of the
housing.
8. Set Dome ID, Baud Rate and
Protocol.
Set dome ID, baud rate and
protocol via DIP switches (Refer to
APPENDIX I).
Take the two sponges off.