1. Channel faders 1-16:
For adjusting the DMX values of the connected light effect units. The current
DMX value is indicated in the display. Controls 1-4 also adjust the brightness ratio of the red, green, blue
and white LEDs of the connected light effect units and control 5 adjusts the total brightness.
2. Number buttons 1-16 (with LED
’
s):
These buttons control different functions depending on the
selected mode and have a dual occupancy; the button PAGE allows to switch between the two channel
groups 1-16 and 17-32:
•FIXTURE: To select and deselect connected fixtures
•MOVEMENT: To activate and deactivate mo
vement patterns (button 1-9) or color effects (button 10-16).
•SCENE: To activate or deactivate illumination scenes.
•CHASE: To activate or deactivate chases
.
3. PAGE button with LEDs:
To switch the number buttons between the two channel groups 1-16 and
17-32.
•
Red LED A: channel group 1-16 is selected.
•
Green LED B: channel group 17-32 is selected.
4. FIXTURE button with LED:
• With the button
active (Blue LED) the number buttons allow selection and deselection of connected
fixtures.
• With the button hel
d down, for adjusting the fade in time for the RGBW color channels together with the
pan wheel.
5. MOVEMENT button with LED:
With the button active (blue LED) the number buttons allow
activation and deactivation of movement patterns or color effects.
6. SCENE button with LED:
With the button active (blue LED) the number buttons allow activation and
deactivation of illumination scenes.
7. CHASE button with LED:
With the button active (Blue LED) the number buttons allow activation and
deactivation of chases.
8. Data wheel PAN:
For controlling the pan movement of moving heads or scanners and for
programming functions.
9. Data wheel TILT:
For controlling the tilt movement of moving heads or scanners and for
programming functions.
10. USB ports:
•
POWER: Provides additional power to connected USB devices.
•
DATA: For connecting a USB storage device for storing and importing data and firmware updates.
11. REC/ENTER button with LED:
•Long
press: To activate or deactivate the programming mode.
•Short
press: For storing individual illumination scenes or chases and for confirming adjustments.
12. MENU/ESC button with LED:
•Long
press: To call and exit the system settings.
•Short
press: To abort a setting procedure and jumping back to a higher menu level.
13. BLACK OUT/DEL button with LED:
•Sets all control channels to the value zero
(e.g. for turning off the fixtures).
•For deleting illumination scenes or chases.
•For inserting a scene into a chase.
14. RUN MODE/SWAP button with LEDs:
•For setting the running mode of a
chase. A short press switches between manual, sound-controlled and
automatic mode. The LEDs next to the button indicate the current setting.
-MANUAL: The chase can be manually advanced step by step with the pan wheel.
-MUSIC: The individual steps of the chase run to the rhythm of the music picked up via the internal
microphone.
-AUTO: The individual steps of the chase run at the adjusted speed and fade time.
•For switching between the parameters when
editing movement patterns.
15. LCD Display:
Shows the current setting or operation parameters.
16. DMX connection:
3-pin XLR jack for connecting the DMX input of the first light effect unit.
