AN-X4-ABRIO-HMI
Page
27
Using the Web Interface
The AN-X module contains a webserver capable of communicating with standard web browsers.
Use the web interface to:
•
configure RIO-HMI operation
•
monitor discrete data, block transfers and network diagnostics
•
view AN-X logs
•
configure the Ethernet settings
•
create a diagnostic capture file for use by technical support
•
update the AN-X firmware and kernel
•
select and remove firmware files on the AN-X
•
reboot the AN-X
It also contains contact information for support.
To access the web interface, start your web browser and type the AN-X IP address where you
normally enter web addresses in the browser.
The left pane contains commands. Click on the arrows at the left of the main headings to expand or
contract the sections.
The contents of the right pane depend on the current command being executed.
Automation Network
Remote I/O HMI Configuration
Refer to page 16 for detailed information on remote I/O configuration.
To configure the AN-X:
1.
Select
Automation Network/Configure RIO-HMI
.
