Page
14
AN-X4-ABRIO-HMI
Feb 2023
The default hostname is ANXxxxxxx, where xxxxxx is the serial number of the AN-X module.
Submitting the Configuration
Once you have entered all required parameters, click SUBMIT to write the configuration to the file
config.txt on the microSD card. The changes do not take effect until the AN-X restarts.
The following page appears when you click SUBMIT.
Wait until the AN-X has completely restarted, then click
Continue
.
If you have changed the IP address, enter the new IP address in the browser’s address field.
Reconfiguring an AN-X from an Unknown State
It sometimes happens that an AN-X has been previously configured with an IP address that causes it
to be inaccessible on the current Ethernet network or that the IP address is unknown.
Remove the microSD card and edit the file
IPCfg\IPConfig.txt
, using a text editor such as Windows
Notepad, to set the AN-X4 to the desired Ethernet configuration.
The Configuration File IPCfg\IPConfig.txt
The Ethernet configuration is stored in the file
IPCfg\IPConfig.txt
on the microSD card.
When you perform the
Administration/AN-X IP Configuration
command from the web interface, the
AN-X writes the results to that file.
Each line consists of a keyword followed by a colon and then a value.
Example:
IP: 192.168.1.12
Anything after a semicolon on a line is treated as a comment.
