QSW-6200
Series Switch Hardware Installation and Reference Guide
17
www.qtech.ru
Figure 1-10 Front Panel of QSW-6200-32F
Note:
1. System status LED
2. Power status LED (PWR1)
3. Power status LED (PWR2)
4. MGMT port status LED
5. Console port
6. 10/100/1000Base-T auto-sensing Ethernet
port
7. GE SFP port
8. Switch port status LED
9. USB port
10.Mini USB port
11. MGMT port
12.10GE SFP+ port
Back Panel
Figure 1-11 Back Panel of QSW-6200-32F
Note:
1. Grounding connector
2. Expansion module slot 1
3. Expansion module slot 2
4. Power module slot 1
5. Power module slot 2
Power Supply
The QSW-6200-32F supports two power modules. For details, see the section
“Power Modules”.
Dual-power input: The switch can be powered by one power module, or two power modules. When both two modules are
available, the switch is powered in current sharing mode.
When the switch is powered by the dual-power modules, if the system working power is greater than the capacity of
single power module, power redundancy cannot work; if one power module fails, the switch system will be affected.
Heat Dissipation
The QSW-6200-32F is designed with left and right fans for heat dissipation, thereby ensuring the normal function of the
device in the specified environment. Sufficient space (10 cm distance from both sides and the back panel of the cabinet)
should be reserved to allow air circulation.
