QSSC -680 series, User Manual

Page: 14 / 98

Chapter 1 — Introduction
5
QSSC-680 I/O Ports
The QSSC-680 has the following I/O port configuration.
1. PS/2 mouse Connect a PS/2 pointing device to this port.
2. Serial port Connect serial devices to this port.
3. PS/2 keyboard Connect a PS/2 keyboard to this port.
4. ID button/ rear ID LED Press to light front and rear ID LEDs (see table below for behavior).
5. Status LED Behavior is controlled by BMC (see below for behavior).
LED Name Color Condition Occurrence
Off OK ID LED Blue
Blinking ID Button pressed on chassis
(ID command executed)
Amber Blinking System error: such as temperature state or fan
failure Status LED
Green Solid OK
6. USB ports Connect USB devices to these two ports.
7. VGA port Connect a monitor to this port.
8. KVM over IP Connect a RJ-45 jack to this port to link to a 10/100M LAN from AST2000.
9. NIC1 Connect a RJ-45 jack to this port to link to a 10/100/1000 Megabit Ethernet
LAN.
10. NIC2 Connect a RJ-45 jack to this port to link to a 10/100/1000 Megabit Ethernet
LAN.