background image

11

TD-000477-01-A

© 2017 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries.   

All other trademarks are the property of their respective owners. 

http://patents.qsc.com.

Contact

Mailing Address

QSC, LLC

1675 MacArthur Boulevard

Costa Mesa, CA 92626-1468 U.S.

Main Number

(714) 754-6175

(800) 854-4079 toll-free (U.S. only)

World Wide Web

www.qsc.com

Sales & Marketing

Voice

(714) 957-7100 International

Toll free (U.S. only) (800) 854-4079

FAX

(714) 754-6174

E-mail

[email protected]

Support

24/7 Support

QSC offers 24/7 support on Q-SYS™ Networked 
Audio Systems only.

Full Support for all QSC Products

Business Hours: 7 AM to 5 PM Pacific Time (Mon-Fri)

Tel. 800-772-2834 (U.S. only)

Tel. +1 (714) 957-7150

Fax. +1 (714) 754-6173

Q-SYS Emergency-only After-Hours and Weekend Support

 1

Tel: +1-888-252-4836 (U.S./Canada)

Tel: +1-949-791-7722 (non-U.S.)

1  After hours calls are guaranteed a 30 minute response time from a 

Q-SYS Support Team member. For Q-SYS ONLY!

E-mail

[email protected]

An immediate e-mail response is not guaranteed. For 
URGENT issues use the phone numbers above.

Q-SYS™ Customer Support

Please visit the QSC website at www.qsc.com for an electronic copy of this manual.

Summary of Contents for DPA-Q












Reviews: